Whole house · Low pressure
Soft Wash House Washing in Johns Island, SC
A wash that kills the growth on the siding instead of sandblasting the paint.
A whole-house soft wash cleans siding, brick, stucco, and trim with low pressure and a mix made to kill what is growing, not to strip the surface. In the Lowcountry the green film on the north wall is almost never dirt. It is mildew and algae, fed by humidity, shade, and winters that never quite reset the wall. Pressure washing is for the concrete. This page is for the house.
Why Lowcountry houses turn green
Salt air leaves a film. Live oaks and pines hold moisture against the wall and drop tannins that stain the paint underneath. Roof runoff streaks the fascia. Vinyl and painted fiber cement grow the same blotchy algae, and brick holds it in the mortar joints. A pressure washer can make vinyl look clean for a week and still leave the growth in the pores — or it can force water behind the cladding.
Soft washing dwells on the surface and rinses at about the pressure of a garden hose. That is how we wash the body of the house in Charleston, on Johns Island, James Island, Kiawah, Seabrook, Wadmalaw, in West Ashley, and on Folly Beach.
What a house wash includes, and what it does not
Siding, soffits, fascia, and the outside of windows and doors that are safe to rinse. We treat the house as one system. The wall under a dripping gutter stays dirty if the gutter is the source, which is why one-story roof and gutter cleaning is a separate visit when the streaks start overhead. We do not clean two-story roofs.
Oxidation on old vinyl — the chalky residue — is not mildew. A soft wash will not turn chalked vinyl back into a factory finish, and we will not pretend it will. Failed paint is the same story: washing shows the failure. It does not cause it, and it is not a coat of paint. Porch floors and rails that need a new coat are a painting visit after the wash.
Siding we see on these islands
Vinyl, fiber cement, painted brick, stucco, and occasional cedar shake from Kiawah and Seabrook down through Wadmalaw. Shake and any wood with a tired coating need a lighter hand than a sound hardie wall. Tell us the siding when you request an estimate so the mix matches the wall. If you are not sure, a photo of the green side and a photo of a corner — where the material is easiest to see — is enough to start.
Questions about this work
Will a soft wash damage painted siding?
The rinse is low pressure on purpose, so sound paint stays put. Paint that is already loose can come off when the mildew underneath is washed away. We would rather you know that than blast the wall to hide it.
How is this different from pressure washing?
Pressure washing is for concrete, pavers, and other flatwork. Soft washing is for the house. They are different setups, and we do not wash siding with the driveway wand.
Do you wash windows as part of the house?
The outside of the glass gets rinsed with the wall. This is not an interior glass service, and we do not pull windows apart. If a window already leaks, say so before we rinse that elevation.

